![]() ![]() Mount controller anywhere in cabin (this is important for ease of accessibility in the event of unforeseen failure).Repeat step 4 & 5 for other side of rear window.With the rear window closed and the handle in the closed position line up the actuator with the pin extended so the shoulder on the pin is to the underside and in the center of the bracket and screw actuator onto window frame using 2 8g x 12 self drill screws.Drill the two holes for pop rivets and mount small bracket using supplied pop rivets. Then place and mark the position of the rear window bracket on the frame of the window making sure the lip of the bracket is facing towards the actuator, so if the window closes with the actuator in the locked position the bracket will push the pin into the actuator. Hold an actuator on the rear window frame as near as possible to the window handle but not as to interfere with the movement of the handle, and making allowance if protection bracket is to be installed.Repeat step 1 & 2 for all 4 side window handles.The bracket can also be bent up or down to ensure the actuator pin engages with the pin when locked and clears the bracket when unlocked. This can be done by using a file to make the hole larger. Note: The hole in the bracket may have to be enlarged to ensure that the pin moves freely with the window handle in the open or closed position.Secure actuator to window frame using the 2 of the 8g x 12 screws. Now push the pin of the actuator fully down to make sure that the top of the pin clears the bracket so the window can be opened. Where the bracket is now installed place an actuator on the inside of the window frame under the bracket with the actuator pin extended upwards and line up the pin to the center of the hole in the bracket and the shoulder on the pin to the underside of the bracket. FLEXIGLASS TRAYS INSTALLUsing the pop rivets supplied install the bracket onto the top of the window frame with the bent edge facing up. Drill two holes through the bracket and into the window frame with a 3.5mm pop rivet drill. ![]() Select location for side window bracket (close to handle but leave enough room so as not to interfere with movement of handle, and making allowance if protection bracket is to be installed).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |